|.Safety Prevention Measures Please always place | The altitude and the | Potholder plug | Do not use a broken thisdeviceonastable | tropical environment | with wat hand; | powerlessness surface, otherwise, | theadaptorfitsdepend | otherwise, electric | apowercorinearheat it may fall and be | on which adapters | shock may occur. | source; otherwise, damaged thenceforth device. | Make sure the plug | electric shock or The rating plate on | has a good touch | fire may occur.
Il. Installation Instructions 1. Accassorles Power cord CQ Bandstand Warranty card and Signal cable certificate of conformity User manual (The above pictures are for illustration only and the physical accessories shall govern.) 2. Angle Adjustment 2.1 The screen can be adjusted by 2.2 When adjusting the angle of the inclining forward and backward; monitor, be sure not to touch or press however, the specific adjustment the area of the screen. depends on the pacific model of the device.
11l. Connect the Monitor Before connecting the LCD monitor to PC, please power the PC and the monitor oO Power Plug Connect the power cord of the monitor into the POWER port in the back of the monitor. © DVI Port Connect the DVI cable into the DVI IN port in the back of the monitor (this needs the support of the monitor).
IV. User Setup 1. Schematic Diagram of Keys Description of Keys' Functions 1 M Pops up the menu/Backs to the previous menu (in case of main menu, . exits from the whole menu). When the menu is activated, used as the left function selection key, 2 and decreases progressively the value of the progress bar; when the < menu is inactivated, used as the specified shortcut mode hot key (for sighting device).
V. Operation Menu {OSD) Function Descriptions Me gens | firm, | Sub menu Susan | Wem | Description Brightness NONE NONE | NONE | Adjudicatory brightness Contrast NONE NONE | NONE | Industrialize contest on NONE | NONE | Activate dynamic corniest on NONE | NONE | Inactive dynamic contrast por Re tum 1 NONE NONE | Re tum to the previous menu Exit & NONE | NONE | Tiresome the whale many Standard Le NONE NONE | Normal work mode.
VI. FAQ Faults occurring Possible solutions The power indicator lights not on 4 Check If the power Is on # Check if the power cord is connected. Impossible plug-and-play # Check if the function of plug-and-play of the device is compatible with PC. 4 Check If the display card Is compatible with the plug-and-play function. Dimming picture © Adjust brightness and contrast. Flickering picture or picture with ripples ¢ There may be electrical appliances or equipment with electronic disturbance.
Vil. Product Specifications dramas — ratio Armagnac {mm) Dot distance (mm) en | 16:9 03114 19201080 | 16:9 | 0.3637 19201080 me || 2000800 temperature Working temperature 0°C to 45°C Humidity RH for operation Note: The actual application of the above parameters shall be subject to the specific model. Veil.
