Computer Computer Hardware User Manual

BIOS Setup
3-19
Cool’n’Quiet
The Cool’n’ Quiet technology can effectively and dynamically lower CPU speed and
power consumption.
Advance DRAM Configuration
DDR Memory Timing by SPD
Setting to [Enabled] enables DRAM automatically to be determined by BIOS based
on the configurations on the SPD (Serial Presence Detect) EEPROM on the DRAM
module.
Bank Interleaving
Interleaved memory is system memory divided into two or more sections. Setting
to [Enabled] allows memory to be accessed faster since each section of memory
is capable of being utilized at once.
1T/2T Memory Timing
This setting controls the SDRAM command rate. [1T] is faster than [2T].
Important
To ensure that Cool’n’Quiet function is
activated and will be working properly, it
is required to double confirm that:
1.Run BIOS Setup and select Fre-
quency/Voltage Control. Under
Frequency/Voltage Control, set
Cool’n’Quiet to [Enabled].
2.Enter Windows, and select [Start]->
[Settings]->[Control Panel]->[Power
Options]. Enter Power Options
Properties tag, and select Minimal
Power Management under Power
schemes.