Computer Computer Accessories User Manual

Chapter 3
3-22
Power Management Option
This item is used to select the degree (or type) of power saving and is related
to these modes: Suspend Mode and HDD Power Down. There are three op-
tions for power management:
Min Saving Minimum Power Management. Suspend Mode = 1 Hour.
Max Saving Maximum Power Management. Suspend Mode = 1 Min.
User Define Allows end users to configure each mode separately.
HDD Power Down
If HDD activity is not detected for the length of time specified in this field, the
hard disk drive will be powered down while all other devices remain active.
Settings are Disabled and 1 through 15 MIn.
Doze Mode
After the selected period of system inactivity, the CPU clock runs at slower
speed while all other devices still operate at full speed. Settings are Disabled,
1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min, 20 Min, 30 Min, 40 Min and 1
Hour.
Suspend Mode
If system activity is not detected for the length of time specified in this field, all
devices except CPU will be shut off. Settings are Disabled, 1 Min, 2 Min, 4
Min, 6 Min, 8 Min, 10 Min, 20 Min, 30 Min, 40 Min and 1 Hour.
PM Control by APM
Setting to Yes will activate an Advanced Power Management (APM) device to
enhance Max Saving mode and stop CPU internal clock. Settings are Yes, No.
Video Off Option
This setting is used to control the mode in which the monitor will shut down.
Setting options:
Always On Always turn on
Suspend --> Off During suspend mode, the monitor will shut down
All Modes --> Off The monitor is turned off during doze, standby,
or suspend mode.