Owner's Manual

BIOS Setup
MS-96E3
3-15
BIOS Setup
MS-96E3
PCIE Device Wake Up System
This setting species whether the system will be awakened by the PCI Ex-
press PME (Power Management Event).
Resume On RTC Alarm
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.
Restore on AC Power Loss
This setting species whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off] Leaves the computer in the power off state.
[Power On] Leaves the computer in the power on state.
[Last State] Restores the system to the previous status before power
failure or interrupt occurred.
PWRON LAN1,2 / LAN3,4 Control, PWROFF LAN1,2 / LAN3,4 Control,
WatchDog LAN1,2 / LAN3,4 Control
LAN Bypass feature removes a single point of failure so that essential busi
-
ness communication can continue while a network failure is diagnosed and
resolved. In the event of a power, hardware or software failure, Hardware
Bypass will automatically activate, allowing network trafc to continue. Trafc
between the LAN and WAN is allowed without interruption.