Owner's Manual

2-20

Hardware Setup

MS-96E3

Hardware Setup

MS-96E3

JuMper

Clear CMOS Jumper: JBAT1

There is a CMOS RAM onboard that has a power supply from an external battery

to keep the data of system conguration. With the CMOS RAM, the system can

automatically boot OS every time it is turned on. If you want to clear the system

conguration, set the jumper to clear data.

Important

You can clear CMOS by shorting 1-2 pin while the system is off. Then return to

2-3 pin position. Avoid clearing the CMOS while the system is on; it will damage

the mainboard.

Clear Data

Keep Data

JBAT1