Owner's Manual

2-16
Hardware Setup
MS-96E3
Hardware Setup
MS-96E3
Front Panel Connectors: JFP1
This connector is provided for electrical connection to the front panel switches and
LEDs and is compliant with Intel Front Panel I/O Connectivity Design Guide.
PIN SIGNAL PIN SIGNAL
1
3
5
7
9
HDD+
HDD-
RESET-
RESET+
NC
2
4
6
8
10
PLED
SLED
PWSW+
PWSW-
KEY
2
INTRUER_N
GND
1
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is
opened, the chassis intrusion mechanism will be activated. The system will re-
cord this status and show a warning message on the screen. To clear the warn-
ing, you must enter the BIOS utility and clear the record.
9
10
12
Keyboard/Mouse Connector: J2
This connector is used to connect a mouse/keyboard.
PIN SIGNAL PIN SIGNAL
1
3
5
7
9
KBMS_Power
NC
GND
MSCLK_PH#
MSDAT_PH#
2
4
6
8
10
KBMS_Power
NC
GND
KBCLK_PH#
KBDAT_PH#
9
10
1
2
VGA Connector: JVGA1
The DB15-pin female connector is provided for monitor.