Owner's Manual

2-12
Hardware Setup ▍
MS-96D9
Hardware Setup ▍
MS-96D9
Fan Power Connector: CPU_F1, SYSFAN1
The fan power connectors support system cooling fan with +12V. When con-
necting the wire to the connectors, always note that the red wire is the positive
and should be connected to the +12V; the black wire is Ground and should be
connected to GND. If the mainboard has a System Hardware Monitor chipset
onboard, you must use a specially designed fan with speed sensor to take ad-
vantage of the CPU fan control.
Important
Please refer to the recommended CPU fans at processor’s ofcial website or
consult the vendors for proper CPU cooling fan.
PIN SIGNAL
1
2
3
4
GND
+12V
Sensor
Control
CompactFlash Socket: CF1
This socket is provided for CompactFlash (CF) cards.
PIN SIGNAL
1
2
3
GND
+12V
Sensor
1 3
CPU_F1
4
1
SYSFAN1