Owner's Manual
2-16
Hardware Setup
▍
MS-96D7
Hardware Setup
▍
MS-96D7
JuMper
Clear CMOS Jumper: JBAT1
There is a CMOS RAM onboard that has a power supply from an external battery
to keep the data of system conguration. With the CMOS RAM, the system can
automatically boot OS every time it is turned on. If you want to clear the system
conguration, set the jumper to clear data.
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to
1-2 pin position. Avoid clearing the CMOS while the system is on; it will damage
the mainboard.
1
Clear DataKeep Data
1
JBAT1
1
Fan Control Jumper: J1, J2, J3, J7
This jumper species the pin numbers of the system fans.
1
4 pin fan
speed control
1
J2, J7
1
3 pin fan
speed control
1
1
J1, J3
1
4 pin fan
speed control
3 pin fan
speed control