User manual

Recovery Media Builder

can help you prepare the Linux/DOS or WinPE

recovery environment either on a CD/DVD disc or a thumb drive.

To automatically boot from the recovery media please make sure the on-

board BIOS is set up to boot from CD/USB first.

2. In the boot menu select Normal Mode to use the Linux recovery environment (more

preferable) or Safe Mode to use the PTS DOS recovery environment (in case you’ve got

problems with Linux). Moreover you’ve got the option to boot into the Low-Graphics Safe

Mode (PTS DOS safe mode) to cope with a serious hardware incompatibility. In this case, only

the minimal set of drivers will be included, like hard disk, monitor, and keyboard drivers. This

mode has simple graphics and a simple menu.

By default the Normal Mode will be automatically initiated after a 10 second

idle period.

3. In the Linux launch menu select Boot Corrector. You can find it in PTS DOS as well.

4. On the Wizard's Welcome page, select the Correct the Master Boot Record (MBR) option.