User manual

88 Series Outboard / 8801 Issue 7.6
Bargraph LED Meter
The VU meter can be set to display the input or output signal level.
 Pressing the O/P Gain knob toggles between input and output monitoring
and the current state is indicated by the led to the left of the O/P Gain knob.
The default meter setting is Input.
Overload
There are many gain stages in the 8801 channel strip, and it is possible for
any one of these stages to overload.
Overloading is indicated by one of the following buttons illuminating red:
PHASE Input stage or input signal overload
DYNAMICS Dynamics overload
INSERT Insert overload
EQ EQ overload (detected at each band of EQ)
DIGITAL OPTION ADC Option Board overload
If overloading occurs at multiple stages only the highest priority button will
light.
The priority is governed by the signal path of the audio.
The input has the highest priority followed by Dynamics/Insert or EQ in the
order set by the Audio Router.
- 15 -