Specifications
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Hardware Setup
- Quick Components Guide
- CPU (Central Processing Unit)
- Memory
- Power Supply
- Back Panel
- Connectors
- Floppy Disk Drive Connector: FDD1
- ATA133 Hard Disk Connectors: IDE1 & IDE2
- Serial ATA Connectors: SATA1, SATA2
- BIOS Password Clear: JPWD1
- Fan Power Connectors: CPU_FAN1, SYS_FAN1
- Front USB Connectors: JUSB1, JUSB2
- SPDIF-Out Connector: SPDOUT1
- Front Panel Audio Connector: JAUD1
- BIOS Flash Write Protection: JWP1
- IEEE 1394 Connectors: J1394_1
- Front Panel Connectors: JFP1
- Jumpers
- Slots
- Chapter 3 BIOS Setup
3-19
BIOS Setup
CPU Shutdown Temperature
If the CPU temperature reaches the upper limit preset in this setting, the system will be
shut down automatically. This helps you to prevent the CPU overheating problem.
This item is available only when your OS supports this function.
CPU Smart Fan Temp.
Select a temperature setting here, and if the temperature of the CPU climbs up to the
selected temperature setting, the system will automatically increase the speed of the
CPU fan to cool down the overheated CPU.
CPU Temp. Tolerance
When a particular temperature setting is selected for the previous item, CPU Smart
Fan Temperature, a temperature tolerance value between 1 to 5 can be adjusted
here.
PC Health Status
Press <Enter> to enter the sub-menu:
System/ CPU Temperature, System/CPU FAN Speed, CPU Vcore, 12V,
5V
These items display the current status of all of the monitored hardware devices/
components such as CPU voltage, temperatures and all fans’ speeds.
H/W Monitor