Specifications
Parameters/address space
4.2 Address space
DI 32x24VDC HF digital input module (6ES7521-1BL00-0AB0)
22 Manual, 04/2015, A5E03485935-AE
4.2
Address space
The module can be configured differently in STEP 7; see following table. Depending on the
configuration, additional/different addresses are assigned in the process image of the inputs.
The letters "a to d" are printed onto the module. "EB a" for example, stands for module start
address input byte a.
Configuration options of DI 32x24VDC HF
You can configure the module with STEP 7 (TIA Portal) or with a GSD file.
When you configure the module by means of the GSD file, the configurations are available
under different abbreviations/module names.
The following configurations are possible:
Table 4- 3 Configuration options
Configuration
Short designation/
module name in the
GSD file
Configuration software, e.g., with STEP 7
(TIA Portal)
Integrated in hardware
catalog STEP 7
(TIA Portal)
GSD file in
STEP 7 (TIA Portal) V12
or higher or STEP 7 V5.5
SP3 or higher
1 x 32-channel without value status
DI 32x24VDC HF
V12 or higher
X
1 x 32-channel with value status
DI 32x24VDC HF QI
V12 or higher
X
4 x 8-channel without value status DI 32x24VDC HF S V13 update 3 or higher
(PROFINET IO only)
X
(PROFINET IO only)
4 x 8-channel with value status DI 32x24VDC HF S QI V13 update 3 or higher
(PROFINET IO only)
X
(PROFINET IO only)
1 x 32-channel with value status for
module-internal Shared Input with up to
4 submodules
DI 32x24VDC HF MSI V13 update 3 or higher
(PROFINET IO only)
X
(PROFINET IO only)
1 x 32 channel with value status (channel
0 and channel 1 for counting, channels
2 to 31 as digital inputs).
DI 32x24VDC HF Count V13, SP1 with HSP
0118 or higher
X
(PROFINET IO only)
Value status (Quality Information, QI)
The value status is always activated for the following module names:
● DI 32x24VDC HF QI
● DI 32x24VDC HF S QI
● DI 32x24VDC HF MSI
● DI 32x24VDC HF Count
An additional bit is assigned to each channel for the value status. The value status bit
indicates if the read in digital value is valid. (0 = value is incorrect).