Technical information

Polycom CMA System Release Notes
Version 5.3
41
UI/
Site
Topology
SSGSE-6332 5.0 The Polycom CMA system does
not save Active Directory users’
Site Topology preferences.
None
Upgrade SSGSE-9088
SSGE-1128
5.0 Multiple bridges lost gatekeeper
registration with CMA system.
PN_Log.txt stops reporting info
after upgrade from 4.1.4 to 5.0.
None
Upgrade SSGSE-8309 5.0 After upgrading to CMA 5.0,
CMA Desktop users were added
to the Global Address Book,
even though the Include
dynamically- managed devices
in the Global Address Book
was unchecked.
Enable and then disable the
Include dynamically- managed
devices in the Global Address
Book option.
Upgrade SSGSE-7338 5.0 If you are attempting to upgrade
from a v4.x CMA system to v5.3,
the upgrade will not work. The
error message reports the failure
but does not state the reason.
First upgrade to CMA system
v5.0 and then upgrade to CMA
system v5.3.
Upgrade SSGSE-6778 5.0 When upgrading a Polycom CMA
system to v5.0, the default region
will be shown as a neighbored
gatekeeper if the IP address for
the default region is different
from that of the Polycom CMA
system.
If the neighbored gatekeeper is
incorrect, remove it manually.
Upgrade/
First Time
Setup
SSGSE-7476 5.0 During first time setup, if the
window session times out, the
first time setup will not complete
and you may be required to start
from the last page you were on. If
the last page was the Network
Setup page, the information you
may have entered will be lost and
you will be required to re-enter
the information.
Click OK in the time-out
message dialog box and as
prompted, start the setup again.
Category
Issue #
Found in
Release Description Workaround