Instruction manual

3-12
MS-7222 Micro-ATX Mainboard
AGP Driving Value
This item specifies an AGP driving force.
AGP Fast Write
The item enables or disables the AGP Fast Write feature. The Fast Write technol-
ogy allows CPU to write directly into the graphics controller without passing
anything through system memory and improves 8x speed accordingly. Select
[Auto] only when your AGP card supports the feature. Options: [Disabled], [Auto].
AGP Master 1 W/S Write
When [Enabled] is selected, writeing to the AGP bus are executed with one wait
state inserted. Setting options: [Enabled], [Disabled].
AGP Master 1 W/S Read
When [Enabled] is selected, one wait state is inserted in the AGP read cycle.
Setting options: [Enabled], [Disabled].
AGP 3.0 Calibration cycle
This setting disables/enables the AGP auto calibration. Setting options: [Disabled],
[Enabled].
VGA Share Memory Size
The system shares memory to the onboard VGA card. This setting controls the
exact memory size shared to the VGA card. Setting options: [Disabled], [16M],
[32M], [64M].
VGA Share Memory Size
Press <Enter> and the following sub-menu appears.
PCI Master 0 WS Write
When [Enabled], writes to the PCI bus are executed with zero wait states. Setting
options: [Enabled], [Disabled].
PCI Delay Transaction
The chipset has an embedded 32-bit posted write buffer to support delay trans-
actions cycles. Select [Enabled] to support compliance with PCI specification
version 2.1.
VLink mode selection
This item lets you choose the speed mode between the North Bridge & South
Bridge. Setting options: [By Auto], [Mode 0], [Mode 1].