Specifications

Note: I/O card is an optional device; if you need it please contact us.

Power Supply

We recommend using a 400W ATX power supply for the DVR unit.

2.3 Power On

After complete the installation , you can power on the PC as usual. Live videos should be displayed on

VGA screen if everything is OK.

2.4 Configuration

When you get videos display on VGA screen, you can configure the VP-100 PC DVR unit using mouse

or the IrDA controller comes with the VP-100 package. Please refer to User manual “Chapter 3

operating VPON by mouse , Chapter 4 Operating VPON by IrDA controller.

Change from GUI mode to IR mode

Default operation mode is GUI mode. VPON provides a GUI mode with mouse support. Be sure to plug

in a PS2 mouse at the back of the unit before or when it starts to boot. Go to the running mode in the

system settings. Change it from mouse mode to IR mode. The unit will reboot. Mouse mode is the only

mode where a log can be found.

2.5 Connecting to the network

Connect an Ethernet-capable computer to the VPON LAN port using an RJ-45 crossed UTP cable or

connect both of the PC and VPON to a same hub :

1. The default IP address for the VPON is 192.168.10.10. Set your PC IP address to 192.168.10.xxx

(where xxx is a value between 0 ~ 254). Set the subnet mask to 255.255.255.0.

2. Reboot the PC.

3. Use IE Web browser version 6.0 SP2 up to access http://192.168.10.10. The login dialog box will

appear. If you have previously changed the administration login or password, enter the login name

and password you previously set. Otherwise, enter the default login name “webmonitor” and the

password “oyo” then click OK.

4. For first time accessing VPON , you will be prompted to install Live Video ActiveX. Download and

run the file to install ActiveX. Then restart IE browser, you will be able to see the videos. If you

choose not to install Active X, you can view videos from the VPON by clicking on the View Video

without Plugins link at the bottom of the page. At the prompt, enter the same administrator login

I/O card

(Model: VP-SI/O44)