Specifications

2. Getting Started

2.1 Summary of the installing

Before install VP-100 to your PC platform, please make sure the PC’s Hardware is compatible with the

motherboards, which we have recommended in the appendix.

VP-100 contains :

2.2 Installation

Step 1 : Installing Motherboard

We recommend motherboards that support Linux device drivers. If you purchased a non-recommended

motherboard yourself make sure it works. We are not responsible for non-approved motherboards. We

carry recommended motherboards for system integrators to use. Put the motherboard together just like a

regular PC.

Step 2: Installing CPU

We recommend any Pentium 4 Class CPU. Install as usual and attach the heat sink and fan.

Step 3: Installing Memory

We recommend installing a good brand name 256MB DDR memory.

NOTE: If you choose MPEG4 compression standard, please install 512MB DDR memory.

Step 4 : Installing VGA Card

We recommend VGA cards as in supporting list (Please check appendix) .We carry VGA cards for system

integrators. Insert the VGA card into the AGP slot. Not all VGA cards will work due to unsupported

Linux device drivers.

Description Quantity

VP-40 Capture Card 1

DVR on chip module (DOM) 1

IrDA Controller & receiver 1

Manual CD 1

Quick reference manual 1

Yellow IDE Cable 1

Watch dog Wire 1

Battery 2

DDR Memory