Specifications

15
4. Input the time segment you want to copy to CD and press OK.
6.3 Searching for a file
The VP- 100 playback list can be searched for a specific file. You can conduct the search based on time,
event, or text.
To search for a recorded file:
1. While viewing the play list, press the Menu button to display the menu.
2. Select one of the following options using the Up or Down arrow buttons:
Search by Time - searches the list of recorded files for the specified recording timeline.
Search by Event - Searches the list of recorded files for the specified event such as a motion or a GPIO
trigger that occurred within the specified time interval.
Search by Text - searches the list of files recorded with POS information for specified text that was
recorded within the specified time interval.
3. Press the Right arrow button to view the submenu for the selected option.
4. Select each of the options such as Year, Month, Day, and so on using the Up or Down arrows.
5. Modify the settings as required using the Left and Right arrow buttons.
Note: If you select the Search by Event option, choose an event from GPI 1~16 and Motion 1~16. If
you choose the Select by Text option, enter the text using the Key Pad button.
6. Press OK when done to conduct the search.
6.4 Locking files
To prevent accidental deletion of recorded files, you can lock a file. This also prevents over-writing of the
file when the recording mode is set to Cyclic.
To lock a file:
1. While viewing the play list , use the Up/Down arrow buttons to select the desired file.
2. Press the Menu button to display the menu.
3. Select the Lock File! Option using the Up or Down arrow buttons:
4.Press the OK button to confirm.
The file is locked and cannot be deleted or over-written. The locked file is represented by an asterisk (*)
next to it. To unlock a file, follow the same procedure and select the Unlock File! option from the menu.
Note: Please refer CD user manual Chapter 4 OSD for more detail operation information.