Specifications

13
6. IR Remote Control Operation
6.1 How to playback recorded Video/Audio files
1. Press Menu key on remote controller and then use Up/Down move to playback and press “OK”
to bring up playback list as below: Access any of these files by pressing the right arrow button.
2. The alarm condition, which caused the file to be recorded, is indicated in the list. For instance, in the
screen shot shown here, the letter M next to a file indicates that the file was recorded after motion was
detected by the camera. “A” indicates that the file was recorded after a GPIO event. An asterisk (*)
before the date indicates that the file is locked.
3. To view video from a specific time, press menu (when you are already on the Playback list screen) to
search for video by time or event.
4. Press the Display button on the remote control to display various properties of the recorded file. The
date and time of recording are displayed in the upper right corner.
Progress - A one-hour time line is displayed at the bottom of the screen with the moving orange line
indicating the status of playback.
Recorded Data - The aqua colored line represents how much of the one hour time interval was recorded.
A full blue line means that the whole hour interval was recorded.