Specifications

10
5. Graphic User Interface (GUI)
5.1 Introduction
VP-100 can be configured using either the supplied remote control unit (or a keyboard) or a mouse. This
chapter covers mouse operation. The VP-100 must be in GUI mode for mouse operation. Under GUI
mode, keyboard is used ONLY for data entry.
Local surveillance GUI:
DVR basic information: including date, time, total hard disk size and LAN status.
Camera status:
R M
Color Recording Mode
Gray No video signal
Blue No recording
Red Full recording
G
Color Status of each DI and DO device.
Gray DI or DO not detected
Red DI or DO was detected
5.2 Setup Video Quality
Use the video quality button to set all the video parameters for the cameras connected to the VP-100.
1. First, please change to single screen as following .
Color Motion detection Status
Gray Motion not detected
Yellow Motion detected
Camera status
Playback
System configuration
DVR basic information
Split-screen / Live surveillance
Full screen monitoring / I/O button