Specifications

9-108
MS-120X and MS-220X Integration Guide
Prefix/Suffix Values
Parameter # P = 69h, S1 = 68h, S2 = 6Ah
Note: This section only applies to setting prefix/suffix values for the
MS-1204 and MS-2204. To set prefix and suffix values for the
MS 1207 and MS-2207, use ADF programming (see Send Preset
Value on page 13-31.)
A prefix and/or one or two suffixes can be appended to scan data for use in data editing. To
set these values, first scan one of the following bar codes, then scan a four-digit number
(i.e., four bar codes from Numeric Bar Codes beginning on page 9-144) that corresponds
to the key codes for various terminals. These codes can be found in Table A-1 on page A-1.
To change the selection or cancel an incorrect entry, scan the Cancel bar code on page
9-146.
Note: In order to use Prefix/Suffix values, first set the Scan Data
Transmission Format (MS-XX04). See page 9-110.