Computer Computer Hardware User Manual

AWARD

BIOS Setup

3-25

MODEM Use IRQ

Name the interrupt request (IRQ) line assigned to the modem (if any) on your

system. Activity of the selected IRQ always awakens the system. Settings:

3, 4, 5, 7, 9, 10, 11 and NA.

Soft-Off by PWRBTN

This feature allows users to configure the power button function. Settings

are:

Instant-Off The power button functions as a normal power-on/-

off button.

Delay 4 Sec When you press the power button, the computer

enters the suspend/sleep mode, but if the button is

pressed for more than four seconds, the computer

is turned off.

IRQ/Event Activity Detect

Press <Enter> to enter the sub-menu and the following screen appears:

USB Resume from S3, VGA, LPT & COM, HDD & FDD, PCI Master,

PowerOn by PCI Card, Wake Up On LAN/Ring

These items specify whether the system will be awakened from power

saving modes when activity or input signal of the specified hardware

peripheral or component is detected.

IRQ/Event Activity Detect

USB Resume from S3 Disabled

VGA OFF

LPT & COM LPT/COM

HDD & FDD O N

PCI Master O F F

PowerOn by PCI Card Disabled

Wake Up On LAN/Ring Disabled

RTC Alarm Resume Disabled

Date (of Month) 0

Resume Time (hh:mm:ss) 0 0 0

IRQs Activity Monitoring Press Enter

Item Help

Menu Level 88