Computer Computer Hardware User Manual

AWARD
®
BIOS Setup
3-17
Integrated Peripherals
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
VIA OnChip IDE Device Press Enter
VIA OnChip PCI Device Press Enter
Init Display First PCI Slot
OnChip USB Controller All Enabled
USB Keyboard Support Disabled
USB Mouse Support Disabled
IDE HDD Block Mode Enabled
POWER ON Function BUTTON ONLY
KB Power ON Password Enter
Hot Key Power ON Ctrl-F1
Onboard FDC Controller Enbaled
Onboard Serial Port 1 3F8/IRQ4
Onboard Serial Port 2 2F8/IRQ3
UART Mode Select Normal
RxD , TxD Active Hi, Lo
IR Transmission Delay Enabled
UR2 Duplex Mode Half
Use IR Pins IR-Rx2Tx2
Onboard Parallel Port 378/IRQ7
Parallel Port Mode E C P
EPP Mode Select EPP1.7
ECP Mode Use DMA 3
PWRON After PWR-Fail Off
Game Port Address 201
Midi Port Address 330
Midi Port IRQ 10
CMOS Setup Utility - Copyright(C) 1984-2000 Award Software
Integrated Peripherals
Item Help
Menu Level 8
VIA OnChip IDE Device
Press <Enter> to go to the sub-menu screen similar to the following:
8
8
OnChip IDE Channel0 Enabled
OnChip IDE Channel1 Enabled
IDE Prefetch Mode Enabled
Primary Master P I O Auto
Primary Slave P I O Auto
Secondary Master P I O Auto
Secondary Slave P I O Auto
Primary Master UDMA Auto
Primary Slave UDMA Auto
Secondary Master UDMA Auto
Secondary Slave UDMA Auto
VIA OnChip IDE Device
Item Help
Menu Level 88