Specifications

CHAPTER 3 AWARD
®
BIOS SETUP
3-26
CPU Clock/Spread Spectrum
This item allows you to select the clock generator Spread Spectrum
function and system bus frequency (CPU Clock). The default is CPU default
frequency. If you over-clock the processor, the system will hang-up. (Press
F10 to resume to the original value) CPU Clock/Spread Spectrum
CPU Fan RPM
During Enabled, this will monitor the RPM of your CPU Power fan.
CPU Temperature
This will show the CPU temperature.
TOP TECH. III
This option is used to disabled or enabled the J2 connector 20 cm
thermistor. The default setting is Disabled (See page 2-27). When choosing
Enabled, “TOP TECH III Temp” item will appear onscreen.
CPU Critical Temp
This option is for setting the critical temperature level for the
processor. When the processor reach the temperature you set, this will
reduce the load on the processor.
Shutdown Temp
This option is for setting the Shutdown temperature level for the
processor. When the processor reach the temperature you set, this will
shutdown the system. This function only works with Windows
®
95/98
operating system.