User Manual
Table Of Contents
- Quick Start
- Specifications
- Special Features
- Package Contents
- Back Panel Connectors
- Overview of Components- CPU Socket
- DIMM Slots
- PCI_E1~3: PCIe Expansion Slots
- M2_1~4: M.2 Slots (Key M)
- SATA_1~4 & SATA_A1~2: SATA 6Gb/s Connectors
- JAUD1: Front Audio Connector
- JFP1, JFP2: Front Panel Connectors
- CPU_PWR1~2, ATX_PWR1: Power Connectors
- JCI1: Chassis Intrusion Connector
- JUSB1: USB 3.2 Gen 2 Type-C Front Panel Connector
- JUSB2: USB 3.2 Gen 1 Connector
- JUSB3~4: USB 2.0 Connectors
- JTPM1: TPM Module Connector
- JOC_FS1: Safe Boot Jumper
- JDASH1 : Tuning Controller Connector
- CPU_FAN1, PUMP_FAN1, SYS_FAN1~5: Fan Connectors
- JBAT1: Clear CMOS (Reset BIOS) Jumper
- BAT1: CMOS Battery
- JRGB1: RGB LED Connector
- JARGB_V2_1~3: A-RAINBOW V2 (ARGB Gen2) LED Connectors
 
- Onboard LEDs
- Installing OS, Drivers & MSI Center
- UEFI BIOS
18
Continued from previous column
Wi-Fi & Bluetooth®
AMD Wi-Fi 6E
  The Wireless module is pre-installed in the M.2 (Key-E) 
slot
  Supports MU-MIMO TX/RX
  Supports 20MHz, 40MHz, 80MHz,160MHz bandwidth in 
2.4GHz/ 5GHz or 6GHz* bands
  Supports 802.11 a/ b/ g/ n/ ac/ ax
  Supports Bluetooth® 5.2**
* Wi-Fi 6E 6GHz may depend on every country’s regulations and will be ready in 
Windows 10 build 21H1 and Windows 11.
** Bluetooth 5.2 will be ready in Windows 10 build 21H1 and Windows 11.
Power Connectors
  1x 24-pin ATX main power connector
  2x 8-pin +12V power connectors
Internal USB 
Connectors
  1x USB 3.2 Gen 2 10Gbps Type-C front panel connector 
(From B650 chipset)
  1x USB 3.2 Gen 1 5Gbps connector (From B650 chipset)
• Supports additional 2 USB 3.2 Gen 1 5Gbps ports
  2x USB 2.0 Type-A connectors (From B650 chipset)
• Supports additional 4 USB 2.0 ports
Fan Connectors
  1x 4-pin CPU fan connector
  1x 4-pin water-pump fan connector
  5x 4-pin system fan connectors
System Connectors
  1x Front panel audio connector
  2x System panel connectors
  1x Chassis intrusion connector
  1x TPM module connector
  1x Tuning controller connector
Jumpers
  1x Clear CMOS jumper
  1x OC safe boot jumper
LED Features
  1x EZ LED Control switch
  1x 4-pin RGB LED connector
  3x 3-pin A-RAINBOW V2 (ARGB Gen2) LED connectors
  4x EZ Debug LED
Continued on next column










