User's Manual
Table Of Contents
- Quick Start
- Specifications
- Package contents
- Block Diagram
- Rear I/O Panel
- Overview of Components
- Processor Socket
- DIMM Slots
- PCI_E1~4: PCIe Expansion Slots
- M2_1~4: M.2 Slots (Key M)
- SATA1~6: SATA 6Gb/s Connectors
- JFP1, JFP2: Front Panel Connectors
- JAUD1: Front Audio Connector
- CPU_PWR1~2, ATX_PWR1, PCIE_PWR1: Power Connectors
- JUSB3~4: USB 2.0 Connectors
- JUSB1: USB 3.2 Gen 2 10Gbps Type-C Connector
- JUSB2: USB 3.2 Gen 1 5Gbps Connector
- JTPM1: TPM Module Connector
- CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Fan Connectors
- JCI1: Chassis Intrusion Connector
- JBAT1: Clear CMOS (Reset BIOS) Jumper
- POWER1, RESET1: Power Button, Reset Button
- JRGB1: RGB LED connector
- JRAINBOW1~2: Addressable RGB LED connectors
- JCORSAIR1: CORSAIR Connector
- Onboard LEDs
- Installing OS, Drivers & Utilities
- UEFI BIOS
- AMD RAID Configuration
- Troubleshooting
- CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Fan Connectors
- CPU_PWR1~2, ATX_PWR1, PCIE_PWR1: Power Connectors
- DIMM Slots
- JAUD1: Front Audio Connector
- JBAT1: Clear CMOS (Reset BIOS) Jumper
- JCI1: Chassis Intrusion Connector
- JCORSAIR1: CORSAIR Connector
- JFP1, JFP2: Front Panel Connectors
- JRAINBOW1~2: Addressable RGB LED connectors
- JRGB1: RGB LED connector
- JTPM1: TPM Module Connector
- JUSB1: USB 3.2 Gen 2 10Gbps Type-C Connector
- JUSB2: USB 3.2 Gen 1 5Gbps Connector
- JUSB3~4: USB 2.0 Connectors
- LED_SW1: EZ LED Control
- M2_1~4: M.2 Slots (Key M)
- PCI_E1~4: PCIe Expansion Slots
- POWER1, RESET1: Power Button, Reset Button
- Processor Socket
- SATA1~6: SATA 6Gb/s Connectors
32
Overview of Components
PCI_E1~4: PCIe Expansion Slots
⚠
Important
∙
If you install a large and heavy graphics card, you need to use a tool such as MSI
Gaming Series Graphics Card Bolster to support its weight to prevent deformation of
the slot.
∙
When adding or removing expansion cards, always turn off the power supply and
unplug the power supply power cable from the power outlet. Read the expansion
card’s documentation to check for any necessary additional hardware or software
changes.
∙
The PCI_E4 slot will be unavailable, when installing M.2 SSD into M2_4.
∙
The both PCIe x1 slots will be unavailable after you install the M.2 SSD into M2_2
slot in Chipset support mode (default mode).
∙
Please refer to the following PCIe bandwidth configuration table for PCIe & M.2
slots for details.
BAT1
PCI_E1: PCIe 4.0/ 3.0 x16 (CPU)*
* PCIe specifications may vary depending on the CPU installed.
PCI_E4: PCIe 3.0 x16 (Chipset)
PCI_E3: PCIe 3.0 x1 (Chipset)
PCI_E2: PCIe 3.0 x1 (Chipset)