System information

88
 Using STM
• Backup Exec Media polling Frequency : The frequency at which
Backup Exec media would be polled.
4. Click Save to save the configuration and push it out to the agent to begin
monitoring the device.
Configuring Symantec NetBackup
To configure, ensure you meet the appropriate requirements and complete the
following tasks.
Requirements:
The following items are required before you begin:
• Supported versions: Symantec NetBackup 4.5, 5.1.x, 6.1.x, 6.5.2,
6.5.3.x, 6.5.4 Servers (Windows, Solaris, AIX, Linux, HP-UX and Tru64)
• A Storage Manager OS agent must be installed on the NetBackup
master server.
• The NetBackup install directory.
Configuring a Symantec NetBackup Server
To begin follow the instructions below.
1. On the New Device page, provide the appropriate values for the following
fields:
• Server IP Address: Select the agent you want to monitor
• Device Display Name: Type a descriptive name for the NetBackup
device (ex: NetBackup NY)
• Timezone: Select the timezone of the Backup Server
• Backup Start Window: Select the Backup start time. This should be the
approximate time backup jobs start for the day. If backups run all day,
define a 24 hour window.
• Backup Window End: Select the Backup end time
• Active: Do not clear this check box, doing so will stop information
collection
• Device Groups: Optional - if you have configured groups, you can add
this backup server to them by clicking the group name
• Licensing: Check this box if you want to assign a license to this device
2. Click Next> to continue to the next configuration screen.