System information

Storage Manager
 73
• McDATA Switch: Check this if the device uses the FIBRE-CHANNEL-
MGMT MIB rather than the standard Fibre Alliance MIB (for example,
McDATA switches use this MIB).
Note: McData i10K series switches do not require the McData checkbox to
be enabled. For more information see this
KB article.
• Device Groups: Optional - if you have configured groups, you can add
this Fibre Channel Switch to them by clicking the group name
• Zoning: Check this box and provide credentials, which will generate the
Zoning reports.
Note: Zoning option is supported via a Windows Agent only.
2. Click Next> to continue to the next configuration screen.
3. Provide the appropriate information about the Fibre Channel switch you want
to monitor. If you are unsure about a value, do not change the value from the
default.
a. Status : Select On
b. SNMP Community String : An SNMP v1 read-only community string
4. Click Save to save the configuration and push it out to the agent to begin
monitoring the Fibre Channel.
Note: Click Test to test SNMP communication between the agent and the Fibre
Channel Switch device. You must select an agent, enter a SNMP community
string and device IP address, before you press this button.