System information

60
 Using STM
a. Server IP Address: Select the agent you want to monitor the Array -
b. Device Display Name: Type a descriptive name for the LSI array (ex:
LSI NY)
c. Storage Array Type: Select Storage Array LSI
d. Active: Do not clear this check box, doing so will stop information
collection from the array
e. Device Groups: Optional - if you have configured groups, you can add
this array to them by clicking the group name
5. Click Next> to continue to the next configuration screen.
Provide the appropriate information about the array you want to monitor. If you
are unsure about a value, do not change the value from the default.
• Status: Select On
• User Name: Type the user name used to access the provider
• Password: Type the password used to access the provider
• Provider IP Address: Type the IP address of the provider
• Storage Array WWN: Type the array identifier (the WWN of the LSI
array)