System information

Storage Manager
 35
After entering the necessary information, the device will appear in the device list
for management
Clicking the icons below allows you to edit, delete, configure Agents, and verify
the current status for the selected device.
Editing Devices
To edit the information about a device, click the edit icon (pencil/paper) in the
same row as the device's name. The screen that is then displayed contains the
current information about that specific IP Device, including IP address, device
name, SNMP Port, Trap Port, Community String, Group, and Agent Licenses,
and whether the IP device is Active or not.
To edit the Device:
1. Click the Edit icon.
2. Enter new information in the desired fields.
3. Click Save.
To change the IP Address for any agents:
1. Set the self register option as 'no' in Server setup page.
2. Change the IP Address in the Agent.
3. Change the IP Address in STM server.
4. Set the self register option as 'yes' in Server setup page.
Activating/Deactivating Polling
Important: From the Edit screen verify that the Active checkbox is checked.
For STM to poll and collect data from a device; the Active checkbox should be
checked. Similarly, to stop STM from collecting or polling data from a device,
uncheck the active box. The change will take effect at the next scheduled
collection time.
Note: Even when a device is marked inactive, you can still change the agent's
configuration, the agent will continue to send traps, and you can still view data
about that device.