System information

22
 Using STM
2. Complete or change the following info:
a. Server IP Address: The Server IP Address of the server where the agent
resides. Note: This is not configurable once the agent is created.
Device Display Name: The name you want to display for this device throughout
STM.
HTTP Port : The port used by STM to collect data from the agent (default 4319).
If you change this setting, STM will immediately try to connect to this agent and
update its configuration. If STM is unsuccessful, then it will abort the changes.
Otherwise, you might lose communication with the agent.
Active: The active agent. Uncheck this box if you want STM to stop collecting
data from the agent. Note: Even though you make a Device inactive, the agent
will continue to run and you will still receive traps and be able to configure the
agent.
Device Groups: A device may be assigned to zero, one, or multiple groups. If
you have any defined groups, the names of those groups will appear in the
Available field.
• To assign a device to a group, simply click the group name in the
Available field. The selected group name will automatically move to the
Selected field.