System information

Managing Storage with STM
 123
1. You can narrow it down the shares by using the regular expression filter.
a. Select the shares you want. You can select multiple shares by using the
CTRL or SHIFT key.
b. Now you will select which agent is going to do the work
c. Device: select which agent you want to do the work
d. Share Depth: Leave this at zero for now - more on depth later
e. Move: Press the down arrow to assign the share, up arrow to unassign
shares.
2. Once you have assigned the shares to the agents you want, press Save at
the bottom. This will immediately assign out the shares to that agent, and file
analysis will be performed at the next scheduled file analysis start time for
that agent. If you want to change the start time, the previous post Files,
Files, Everywhere... shows you how to do that.
Defining Threshold Rules
The Threshold Rule page allows you to set thresholds for conditions and
determine if scripts need to be run or SNMP traps sent. The following
descriptions detail the available options.
• Rule Name: The name you would like to give this rule.
• Section: The section of the devices that you would like to monitor. This
can be done across the Enterprise or by system type.
• Category: The category you would like to monitor.
• Choose Instances: The specific instances you like to rule upon. Click on
to add them to the selected list.
• Condition: The condition you would like to set. First select the field to
monitor, then the condition, and then the value to evaluate the condition
against.
• Duration: The duration that the condition must be true for the action to
be taken
• Then select one of the following:
• Run Client Script: The script that needs to be run when the condition is
met (client-side based).
• Run Server Script: The script that needs to be run when the condition is
met (server-side based).
• Send Trap: Send out SNMP trap.