System information

Storage Manager
 97
4. When Exchange data gathering occurs at the next scheduled time, exchange
module will start collecting data from the server name entered in the
Exchange Virtual Name field.
5. To verify that it is working correctly, run the following commands from the
Exchange module directory
- >> ExchangeDataGathering.exe -
servername=<virtual name> -storage
Requirements for Gathering Exchange 2003/2007 Mailbox/Attachment
Analysis Data
In addition to the steps above, few additional steps have to be followed to gather
Mailbox and Attachments data from Exchange Server 2003/Exchange 2007.
Below are the requirements for the agent to successfully gather
Mailbox/Attachments information:
a. The user account that the STM Agent service is running as should be
logged on locally to the desktop for setting the MAPI Profile.
b. The User should also have a mailbox setup on this Exchange Server
with permissions to access all the other mailboxes (to collect storage
data).
c. The user should have a MAPI profile setup on the Exchange server. If
not, STM agent ships with a utility called MAPIProfilerTool.exe located in
the mod.sys.app.mail.Mail_1.0 module directory. This tool helps the
users create a MAPI Profile.
d. Save the attached exe to a temporary folder. Then at the command
prompt, run the following: >>
MAPIProfileTool -
servername=<Exchange Server ip or host name>
e. This will bring up a dialog box that says 'Choose Profile'. There will be
two alternatives:
If there is a profile already created for the user, then the user can select
that from the drop-down.
1. After the user selects a profile, there is a button called 'Options' that brings
up two options at the bottom of the dialog box.
2. Check the "Set as default profile" option and click on finish. We need a
default profile to be available for the user to log in.
3. If there is no profile created for the user, then it will bring up a dialog
box asking the user to create one.
4. You can leave the Profile name that comes up (which is usually MS
Exchange Settings).
5. Enter name of the Exchange server and then click Next.
6. Choose the default Exchange services