Specification

ESTIMATION:
PANELS ARE AVAILABLE IN 2 STYLES:
Make sure to add 10% to nal tally
for waste/breakage.
Total Corner Panels Needed: 44
Total Flat Panels Needed: 264
Determine how much product you will need for you project by
calculating the surface area where they will be installed. Check
your work by measuring twice. Break up the installation area into
rectangles. For example, the diagram shows a replace surround
with walls on either side where the product will be installed. This
replace surround can be broken up into 5 areas. The 2 large
walls on either side, the 2 short walls and the replace wall
itself. So the total surface area is:
2(10’x8’) + 2(10’x2’) + (10’x7’) = 270 sf
To calculate the number of corners required, measure the height
of the outside corners. In this case there are 2 outside corners on
either side of the replace. The height of each corner is 10’. So the
total corner height is 20’. Since each corner is 6” tall, you will need 2
corners per foot. So multiply the total corner height by 2.
20 ft x 2 = 40 corners
Since each 6”x12”x6” corner covers 0.5 sf, subtract the square
footage that the corner will cover from the total square footage you
need to cover.
40 corners x .5 sf/corner = 20 sf
270 sf - 30 sf = 240 sf = 240 Flat Panels
(Since you need enough at panels to cover 240 sf.
and each at panel covers 1 sf, you need 240 at panels.)
Corner panels
to t around
outside corners.
covers 0.5 sf.
Flat panels for
the main areas of
the project
&
HOW TO ESTIMATE STACKED
STONE PANEL NEEDS
The pieces are designed to interlock together to assist installation.
6”
6”
6”
covers 1 sf.
6”
24”
20
19
18
17
16
14
15
13
12
11
10
8
9
7
6
5
4
3
2
1
10’
10’
8’
8’
2’
7’
10’x 8’
10’
x 8’
10’
x 7’
10’
x 2’
10’
x 2’
LIMITED WARRANTY
STATEMENT
LIMITED WARRANTY
STATEMENT
ESTIMATING
LEDGER PANELS