Owner's Manual

3-21
BIOS Setup
System
System Summary
These items show the hardware specifications of your system. Read only.
Halt On
The setting determines whether the system will stop if an error is detected at boot.
When the system stops for the errors preset, it will halt on for 15 seconds and then
automatically resume its operation. Available options are:
[All Errors] The system stops when any error is detected.
[No Errors] The system doesn’t stop for any detected error.
[All, But Keyboard] The system doesn’t stop for a keyboard error.
PDF created with pdfFactory Pro trial version www.pdffactory.com