Preface Notebook User’s Manual
Preface Contents Chapter 1: Preface Content............................................................................1-2 Regulations and Statements .........................................1-4 FCC-B Radio Frequency Interference Statement .......1-4 FCC Conditions...........................................................1-4 CE Conformity.............................................................1-4 Battery Regulations.....................................................1-5 WEEE Statement ..............
Basic Operations..........................................................3-10 Safety and Comfort Tips............................................3-10 Knowing the Keyboard ..............................................3-12 Wireless Activation for Windows 8 ............................3-16 Knowing the Touchpad ..............................................3-17 About Hard Disk Drive...............................................3-19 Using the Optical Storage Device .............................
Preface Regulations and Statements FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Battery Regulations European Union: Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations. Taiwan: For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
Preface Safety Instructions Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user’s manual should be noted. Keep this equipment away from humidity and high temperature. Lay this equipment on a stable surface before setting it up. The openings on the enclosure are used for air convection and to prevent the equipment from overheating. Do not cover the openings.
Always keep the strong magnetic or electrical objects away from the equipment. When installing the coaxial cable to the TV Tuner, it is necessary to ensure that the metal shield is reliable connected to protective earthing system of the building. Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable.
Preface Trademarks All trademarks are the properties of their respective owners. SRS Premium Sound, SRS and the symbol are trademarks of SRS Labs, Inc. THX and THX TruStudio Pro are trademarks of THX Ltd. which may be registered in some Sound Blaster® is registered trademark of Creative Technology Ltd. jurisdictions. All rights reserved. Revision History 1-8 Version Revision History Date 1.
2 Introductions
Introductions Congratulations on becoming an user of this notebook, the finely designed notebook. This brand-new exquisite notebook will give you a delightful and professional experience in using notebook. We are proud to tell our users that this notebook is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction. Manual Map This User’s Manual provides instructions and illustrations on how to operate this notebook.
Product Overview This section provides the description of basic aspects of the notebook. It will help you to know more about the appearance of this notebook before using it. Please be aware that the notebook shown in this section may vary from the actual one that users purchased. Top-open View The figure of top-open view and description shown below will lead you to browse the main operating area of your notebook. The figures shown here are for reference only.
Introductions 1. Webcam This built-in Webcam can be used for picture taking, video recoding or conferencing, and any other interactive applications. Webcam LED indicator, next to the webcam, grows orange when webcam function is activated; LED goes out when this function is turned off. 2. Internal Microphone This is the built-in microphone and its function is the same with microphone. 3. Quick Launch Sensors Touch the quick launch sensors to activate the specific applications or tools.
Touch this sensor to switch the display off instantly to economize the power consumption. Display Off Hit any key at the keyboard to switch on the display. Touch this button to activate the gaming gadget utility providing users an astonished and efficient solution in game playing. G-Panel (Optional) Or, this button may allow users to define the quick launch button for launching the particular application.
Introductions 8. Touchpad Switch Press this button to enable or disable the touchpad function. The touchpad indicator, if equipped, glows when the touchpad function is disabled. 9. Keyboard The built-in keyboard provides all the functions of a full-sized keyboard. Quick Launch [Fn] Buttons Use the [Fn] buttons on the keyboard to activate the specific applications or tools. With the help of these quick launch buttons, users will be able to do work more efficiently.
General [Fn] Keys Increase keyboard LEDs' RGB saturation level. Decrease keyboard LEDs' RGB saturation level.
Introductions Front Side View 1. Status LED Bluetooth (optional) Bluetooth LED indicator glows amber when Bluetooth function is enabled. Bluetooth LED indicator goes out when this function is disabled. Wireless LAN (WiFi) This LED indicator glows amber when Wireless LAN (WiFi) function is enabled. WLAN(WiFi) LED indicator goes out when this function is disabled. Note: Functions listed above may be optionally supported depending on the model users purchased.
Hard Disk/ Optical Drive Device In-use Blinking amber when the system is accessing the hard disk drive or the optical drive device. Sleep State Blinking amber when the system is in Sleep state. LED goes out when the system is turned off. Battery Status Glowing amber when the battery is being charged. Blinking amber if the battery fails and it is recommended to replace a new battery. Consult the local dealer for purchasing an equivalent type of battery recommended by the manufacturer.
Introductions Right Side View 1. USB 2.0 Ports The USB 2.0 port allows you to connect USB-interface peripheral devices, such as the mouse, keyboard, modem, portable hard disk module, printer and more. 2. Optical Drive Device This notebook is equipped with an optical drive device. The actual device preinstalled in the notebook depends on the model you purchased.
Left Side View 1. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation. 2. Card Reader The built-in card reader may support various types of memory card, such as MMC (Multi-Media Card), XD (eXtreme Digital), SD (Secure Digital), SDHC (SD High Capacity), SDXC(SD eXtended Capacity), MS (Memory Stick) or MS Pro (Memory Stick Pro) cards, depending on the model users purchase.
Introductions Microphone Used for an external microphone. Connect the Center and Subwoofer speakers here. Line In Used for an external audio device. Connect the Rear speakers here. Line Out 4. A connector for speakers. Connect the Surround speakers here. USB 3.0 Ports USB 3.0, the SuperSpeed USB, delivers the higher interface speeds for connecting various devices, such as storage devices, hard drives, or video cameras, and offers more advantages over high-speed data transferring.
Rear Side View 1. Kensington Lock This notebook provides a Kensington Lock hole, which allows users to secure the notebook in place with a key or some mechanical PIN device and attached through a rubberized metal cable. The end of the cable has a small loop which allows the whole cable to be looped around a permanent object, such as a heavy table or other similar equipment, thus securing the notebook in place. 2.
Introductions Bottom Side View 1. Stereo Speakers Give high quality sound blaster with stereo system and Hi-Fi function supported. 2. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation. 3. Battery Pack This notebook will be powered by the battery pack when the AC/DC adapter is disconnected. 4. Battery Release Button It is a bounce-back device as a preparation for releasing the battery pack.
Specification The Specification may change without notice. The actual products sold are different from areas. Please check the detailed Specification with your local dealers. Physical Characteristic Dimension 428(W) x 288 (D) x 55 (H) mm Weight <4.2 kg (with 9-cell battery) CPU Socket FS1r2 uPGA -772pin Processor Type AMD® Richland Core Chip PCH AMD® Bolton M3 FCH Memory Technology DDR3/ DDR3L 1600/ 1866 MHz Memory SO-DIMM X 2 slots Maximum up to 32 GB Power AC/DC Adapter 180W, 19.
Introductions I/O Port Monitor (VGA) D-Sub x 1 USB x 3 (version 3.0) x 2 (version 2.0) Mic-in x1 Line-in x1 Headphone-out x 1 (SPDIF-Out supported) Mini DisplayPort x1 Side-Out x1 RJ45 x1 HDMI x1 Card Reader x 1 (SD) The supported memory cards may vary without notice. Communication Port LAN 10/ 100/ 1000Mb Ethernet Wireless LAN Optionally supported Bluetooth Optionally supported Display LCD Type 17.
Audio Internal Speaker 2 speakers + 1 sub-woofer Sound Volume Adjusted by keyboard hot-key and switches.
Introductions 2-18
3 Getting Started
Getting Started Begin to Use the Notebook For a new user of this notebook, we would like to suggest you follow the illustrations below to begin to use the notebook.
Power Management AC Power It is strongly recommended to connect the AC/DC adapter to the notebook and use the AC power while using this notebook for the first time. When the AC power is connected, recharging the battery will start immediately. Note that the AC/DC adapter included in the package is approved for your notebook; using other adapter model may damage either the notebook or other devices attached to it. Do not cover the AC/DC adapter since it may generate a certain heat while in use.
Getting Started Installing the Battery Pack 1. Align and place the battery to the battery tray with correct orientation. 2. Press down the battery pack to fasten the battery pack in the battery tray. 3. Press the lock/unlock button to the Lock position to make sure the battery pack is securely fastened.
Releasing the Battery Pack 1. Before releasing the battery, make sure the notebook is turned off, and the AC power is disconnected. 2. Press the lock/unlock button to the unlocked position. 3. Locate the battery release button on the bottom side. 4. Push and hold the release button to the battery releasing direction as shown on the bottom side. 5. Dig the edge of battery pack out of the battery tray with your finger tip. Be careful with your finger while trying to take out the battery pack. 6.
Getting Started Battery Safety Tips Replacing or handling the battery incorrectly may present a risk of fire or explosion, which could cause serious injury. Only replace the main battery pack with the same or equivalent type of battery. Do not disassemble, short-circuit or incinerate batteries or store them to temperatures above +25° C (+77° F). Keep away from the reach of children. Do not use rusty or damaged batteries. Dispose of batteries according to local regulations.
Power Management in Windows OS Power management of personal computers (PCs) and monitors has the potential to save significant amounts of electricity as well as deliver environmental benefits. To be energy efficient, turn off your display or set your PC to standby/hibernate mode after a period of user inactivity.
Getting Started Then select a power plan that meets your personal needs. The Power icon will present various and relative options as following: You can wake up your computer from power saving mode by pressing the power button.
Energy Saving Tips Activate the ECO power saving function to manage the computer’s energy consumption. Turn off the monitor after a period of user inactivity. Utilize the Fn and F12 sleep mode keys to turn into power saving mode. Tune the settings in Power Options under Windows OS to optimize the computer’s power management.
Getting Started Basic Operations If you are a beginner to the notebook, please read the following instructions to assure your own safety, and make yourself comfortable during the operations. Safety and Comfort Tips The notebook is a portable platform that allows you to work anywhere. However, choosing a good workspace is important if you have to work with your notebook for a long period of time.
1. Your work area should have enough illumination. 2. Choose the proper desk and chair and adjust their height to fit your posture when 3. When sitting on the chair, adjust the chair’s back (if available) to support your back 4. Place you feet flat and naturally on the floor, so that your knees and elbows have the 5. Put your hands on the desk naturally to support your wrists. 6. Adjust the angle/position of the LCD panel to have an optimal view. operating. comfortably.
Getting Started Knowing the Keyboard This notebook provides a full-functioned keyboard. This keyboard can be divided into four categories: Typewriter keys, Cursor keys, Numeric keys and Function keys. 3-12 1. Typewriter keys 2. Numeric keys 3.
Typewriter Keys In addition to providing the major function of the keyboard, these typewrite keys also provide several keys for special purposes, such as [Ctrl,] [Alt,] and [Esc] key. When the lock keys are pressed, the corresponding LEDs will light up to indicate their status: 1. Num Lock: Press this key to toggle the Num Lock on and off. When this function is activated, you can use the numeric keys that are embedded in the typewriter keys. 2.
Getting Started Decrease the LCD brightness. + Increase the LCD brightness. + Decrease the built-in speaker’s volume. + Increase the built-in speaker’s volume. + Disable the computer’s audio function. + Force the computer into sleep state (depending on the system configuration). + Increase keyboard LEDs' RGB saturation level. + Decrease keyboard LEDs' RGB saturation level. + Quick Launch [Fn] Keys Use the [Fn] buttons on the keyboard to activate the specific applications or tools.
Press and hold the Fn button, and then press the F6 button to turn the Webcam function on. Press again to + turn it off. Webcam Press and hold the Fn button, and then press the F10 button repeatedly to turn Airplane mode on or off recurrently. For flight safety consideration, it is always recommended to turn Airplane Mode on when you are in flight.
Getting Started Wireless Activation for Windows 8 1. Find the “Settings” icon on the desktop and click on it. 2. Enter the “PC Settings” main page by clicking on “Change PC Settings.” 3. Unfold the “Wireless devices” selections under “Wireless.” 4. Make sure Airplane mode is set to OFF here. 5. Turn the WLAN or Bluetooth function on/off by sliding the function switch bar. Refer to the Status LED to check the device status. 1.
Knowing the Touchpad The touchpad integrated in your notebook is a pointing device that is compatible with standard mouse, allowing you to control the notebook by pointing the location of the cursor on the screen and making selection with its two buttons. 1. Cursor Movement Area This pressure-sensitive area of the touchpad, allows you to place your finger on and control the cursor on the screen by moving one of your finger. 2. Right / Left Buttons Acts as the mouse’s right/ left button.
Getting Started Point and Click When you have moved and placed the cursor over an icon, a menu item or a command that you want to execute, simply tap slightly on the touchpad or press the left button to select. This procedure, called as point and click is the basics of operating your notebook. Unlike the traditional pointing device such as the mouse, the whole touchpad can act as a left button, so that your each tap on the touchpad is equivalent to pressing the left button.
About Hard Disk Drive Your notebook is equipped with a 2.5-inch hard disk drive. The hard disk drive is a storage device with much higher speed and larger capacity than other storage devices, such as the floppy disk drive and optical storage device. Therefore, it is usually used to install the operating system and software applications. To avoid unexpected data loss in your system, please backup your critical files regularly. Do not turn off the notebook when the hard disk In-use LED is on.
Getting Started Inserting the Disk 1. Confirm that the notebook is turned on. 2. Press the eject button on the panel and the disk tray will slide out partially. 3. Gently pull the tray out until fully extended. 4. Place your disk in the tray with its label facing up. Slightly press the center of the disk to secure it into place. 5. Push the tray back into the drive. 1. Confirm that the disk is placed correctly and securely in the tray before closing the tray. 3-20 2.
Connecting the External Devices The I/O (input/output) ports on the notebook allow you to connect peripheral devices and communication devices. All functions and devices listed here are for reference only.
Getting Started Communication Devices The functions listed here are supported optionally, depending on the model users purchased. Contact the local dealer for detailed information.
Components Replacement and Upgrade Please be noticed that the memory, hard disk drive, wireless LAN / Bluetooth module and battery pack preinstalled in the product users purchased may be upgradable or replaceable by user’s request depending on the models users purchased. This notebook is equipped with a high-capacity Li-ion battery pack, and the battery pack is replaceable by users.
Getting Started This notebook is equipped with a hard disk drive, and this storage device may be upgradable and replaceable by the authorized dealer or service center. Additional memory module may be installed, by the authorized dealer or service center, to increase the performance of this notebook, depending on the specification limitation. To learn more about upgrade limitation, please refer to the specification in the User’s Manual provided.
