Service manual

66
8258I N/B Maintenance
8258I N/B Maintenance
2.3.9 Inverter Board
Disassembly
1. Remove the battery, keyboard and LCD assembly. (Refer to section 2.3.1, 2.3.2 and 2.3.7 Disassembly)
2. Remove the LCD cover and LCD panel. (Refer to the steps 1-4 of section 2.3.8 Disassembly )
3. Remove three screws fastening the inverter board to free it. (Figure 2-19)
Figure 2-19 Free the inverter board
Reassembly
1. Fit the inverter board back into place and secure with three screws.
2. Replace the LCD panel and LCD cover. (Refer to section 2.3.8 Reassembly)
3. Replace the LCD assembly. (Refer to section 2.3.7 Reassembly)
4. Replace the keyboard and battery pack. (Refer to sections 2.3.2 and 2.3.1 Reassembly)
MiTac Secret
Confidential Document