Service manual

65
8258I N/B Maintenance
8258I N/B Maintenance
Reassembly
1. Replace the cable to the LCD panel.
2. Attach the LCD panel’s brackets back to LCD panel and secure with eight screws.
3. Replace the LCD panel into LCD housing and secure with six screws.
4. Reconnect one cable to inverter board.
5. Fit the LCD cover and secure with two screws and rubber pads.
6. Replace the LCD assembly, keyboard and battery pack. (See sections 2.3.7, 2.3.2 and 2.3.1 Reassembly)
Figure 2-18 Free the LCD panel
5. Remove eight screws that secure the LCD brackets. (Figure 2-17)
6. Disconnect the cable to free the LCD panel. (Figure 2-18)
Figure 2-17 Remove eight screws
MiTac Secret
Confidential Document