Service manual

55
8258I N/B Maintenance
8258I N/B Maintenance
2.3.2 Keyboard
1. Remove the battery pack. (Refer to section 2.3.1 Disassembly)
2. Push firmly to slide the easy start buttons cover to the right (). Then lift the easy start buttons cover up ().
(Figure 2-2)
3. Slightly lift up the keyboard and disconnect the cable from the system board to detach the keyboard. (Figure 2-3)
Figure 2-2 Remove the keyboard cover
Figure 2-3 Remove the keyboard
Disassembly


Reassembly
1. Reconnect the keyboard cable and fit the keyboard back into place.
2. Replace the easy start buttons cover.
3. Replace the battery pack. (Refer to section 2.3.1 Reassembly)
MiTac Secret
Confidential Document