User`s manual

Hardware Setup

MS-7582

Chapter 2

2-19

Hardware Setup

MS-7582

Chapter 2

Switch

This mainboard provides the following switch for you to set the computer’s function.

This section will explain how to change your mainboard’s function through the use of

switch.

Over-Voltage Switch: V Switch

You can over-voltage the CPU/ CPU_VTT/ Memory/ PCH, and increase the maximum

voltage range of CPU/ CPU_VTT/ Memory PCH for adjustment in BIOS by changing

the switch.

Follow the instructions below to over-voltage and to increase the maximum voltage

range of CPU / CPU_VTT/ Memory/ PCH.

Switch 1 : is used to over-voltage the CPU voltage, switching it

to “ON” will over-voltage the CPU voltage for 0.1V, and increase

the maximum voltage adjustment range in BIOS.

Switch 2 : is used to over-voltage the CPU_VTT voltage, switch-

ing it to “ON” will over-voltage the CPU_VTT voltage for 0.2V,

and increase the maximum voltage adjustment range in BIOS.

Switch 3 : is used to over-voltage the DRAM voltage, switching

it to “ON” will over-voltage the DRAM voltage for 0.2V, and in-

crease the maximum voltage adjustment range in BIOS.

Switch 4 : is used to over-voltage the PCH voltage, switching it

to “ON” will over-voltage the PCH voltage for 0.2V, and increase

the maximum voltage adjustment range in BIOS.

Important

While you enable OC Genie to detect your system conguration, please don’t turn on

any parts of V-switch simultaneously. That behavior would oer too much voltage for

device and would be possible to cause some damage of device.

After you set the CPU/ CPU_VTT/ DDR/ PCH voltage in BIOS, you can check the

CPU/ CPU_VTT/ DDR/ PCH voltage by measuring the Voltage Check Point with mul-

timeter. Please refer the following instructions to measure these voltages.

•