User`s manual

Hardware Setup

MS-7582

Chapter 2

2-17

Hardware Setup

MS-7582

Chapter 2

Button

The motherboard provides the following buttons for you to set the computer’s function.

This section will explain how to change your motherboard’s function through the use

of button.

Clear CMOS Button: CLR_CMOS1

There is a CMOS RAM on board that has a power supply from external battery to keep

the system conguration data. With the CMOS RAM, the system can automatically

boot OS every time it is turned on. If you want to clear the system conguration, use

the button to clear data. Press the button to clear the data.

Important

Make sure that you power o the system before clearing CMOS data.

After pressing this button to clear CMOS data in power o (G3) state, the system will

boot automatically.

OC Genie Button: OC_Genie

This button is used to auto-overclock for the system. Press this button to enable the

OC Genie function when the system is in power o state, meanwhile, the button will

light and lock. And then the system will automatically detect the optimum values to

overclock after booting the system. To disable the OC Genie function, please press the

button again after power o the system, meanwhile, the button light will o and unlock,

and the system will restore the default for next boot.

Important

Please install the DDR3 1333 and up memory and equip better heat sink/ cooler with

OC Genie function.

We do not guarantee the OC Genie overclocking range and the damages or risks

caused by the OC Genie overclocking behavior.

You can disable the OC Genie function in BIOS setup. And we suggest you to save

the OC Genie conguration to overclocking prole in BIOS for future using.

The usage of OC Genie is at your own risk. Overclocking is never guaranteed by

MSI.

•