User`s manual

2-10
Hardware Setup
MS-7582
Chapter 2
Hardware Setup
MS-7582
Chapter 2
Back Panel
Mouse/Keyboard
The standard PS/2
®
mouse/keyboard DIN connector is for a PS/2
®
mouse/keyboard.
USB Port
The USB (Universal Serial Bus) port is for attaching USB devices such as keyboard,
mouse, or other USB-compatible devices.
D-LED3 Panel Connector (optional)
This connector connects to a D-LED3 (Debug-LED3) panel (optional), which shows
information on the panel for you and identify the current status or mode of the con-
nected system. Please refer to the D-LED3 quick guide (optional) for more details and
usages.
ESATA/USB Combo Port
The ESATA/USB combo port is for attaching the ESATA external hard drive or USB
device.
1394 Port
The IEEE1394 port on the back panel provides connection to IEEE1394 devices.
LAN
The standard RJ-45 LAN jack is for connection to
the Local Area Network (LAN). You can connect a
network cable to it.
LED Color LED State Condition
Left Yellow O LAN link is not established.
On(Steady state) LAN link is established.
On(brighter & pulsing) The computer is communicating with another computer on the LAN.
Right Green O 10 Mbit/sec data rate is selected.
On 100 Mbit/sec data rate is selected.
Orange On 1000 Mbit/sec data rate is selected.
▶
▶
▶
▶
▶
▶
Mouse
1394 Port
USB Port
LAN
USB PortESATA/ USB
Combo Port
USB Port
Yellow Green/ Orange
Keyboard
USB Port
LAN
USB PortESATA/ USB
Combo Port
D-LED3
panel
connector
(optional)
www.devicemanuals.eu