User`s manual

Hardware Setup

MS-7582

Chapter 2

2-5

Hardware Setup

MS-7582

Chapter 2

Visually inspect if the CPU is seated

well into the socket. If not, take out

the CPU with pure vertical motion

and reinstall.

5. Engage the load lever while pressing

down lightly onto the load plate.

Secure the lever near the hook end

under the retention tab.

7. Make sure the four hooks are in por-

per position before you install the

cooler.

Important

Conrm if your CPU cooler is rmly installed before turning on your system.

Do not touch the CPU socket pins to avoid damaging.

•

Alignment Key