User Manual

45
BIOS Setup
f Hardware Monitor
Sets the fan speeds. Press Enter to enter the sub-menu.
f Power Management Setup
Sets system Power Management of ErP and AC Power Loss behaviors. Press Enter to
enter the sub-menu.
fErP Ready [Disabled]
Enables or disables the system power consumption according to ErP regulation.
[Enabled] Optimize the system power consumption according to ErP
regulation. It will not support S4 & S5 wake up by USB, PCI and PCIe
devices.
[Disabled] Disables this function.
fRestore after AC Power Loss [Power Off]
Sets the system behaviors while encountering the AC power loss.
[Power Off] Leaves the system in power off state after restoring AC power.
[Power On] Boot up the system after restoring AC power.
[Last State] Restores the system to the previous state (power on/ power off)
before AC power loss.
fSystem Power Fault Protection [Disabled]
Enables or disables the system to boot up when detecting abnormal voltage input.
[Enabled] Protect the system from unexpected power operating and remain
the shut down status.
[Disabled] Disables this function.
f Windows OS Configuration
Sets Windows detailed configuration and behaviors. Press Enter to enter the sub-
menu.
fBIOS UEFI/CSM Mode [CSM]
Select CSM (Compatibility Support Module) or UEFI mode to meet the system
requirement.
[CSM] For the non-UEFI driver add-on devices or non-UEFI mode OS.
[UEFI] For the UEFI driver add-on devices and UEFI mode OS.
fGOP Information
Shows the onboard Graphics Output Protocol (GOP) information. Press Enter to
enter the sub-menu. This sub-menu will appear when BIOS UEFI/CSM Mode sets
to UEFI.
fSecure Boot
Sets the Windows secure boot to prevent the unauthorized accessing. Press Enter
to enter the sub-menu. This sub-menu will appear when BIOS UEFI/CSM Mode
sets to UEFI.
f Wake Up Event Setup
Sets system wake up behaviors for different sleep modes. Press Enter to enter the
sub-menu.