Instruction manual

3-21
BIOS Setup
Wake Up Event Setup
You can turn On or Off monitoring of commonly used interrupt requests so they
do not awaken the system from, or reset activity timers for, Doze and Standby
modes. For example, if you have a modem on IRQ3, you can turn On IRQ3 as
a wake-up event, so an interrupt from the modem can wake up the system. Or
you may wish to turn Off IRQ12 (the PS/2) mouse as a wake-up event, so
accidentally brushing the mouse does not awaken the system. The default
wake-up event is keyboard activity.
Resume From S3 By USB Device
The item allows the activity of the USB device to wake up the system
from S3 (Suspend to RAM) sleep state.
Resume From S3 By PS/2 KB
The item specifies how the system will be awakened from power
saving mode when input signal of the PS/2 keyboard is detected. Use
the <PageUp> & <PageDown> keys to select the options. When select-
ing [Password], enter the desired password.
Resume By PS/2 Keyboard
The item specifies how the system will be awakened from power
saving mode when input signal of the PS/2 keyboard is detected.
Resume By PS/2 Mouse
The setting determines whether the system will be awakened from
what power saving modes when input signal of the PS/2 mouse is
detected.