Instruction manual

3-17
BIOS Setup
IDE Devices Configuration
Press <Enter> and the following sub-menu appears:
OnChip SATAA
This setting is used to specify the SATA controller. The settings are:
[Disabled] Disable the SATA controller.
[Enabled] Enable the SATA controller.
SATA Mode
This setting is used to select the SATA mode. The setting are:
[IDE] Set SATA HDD as IDE mode
[RAID] RAID enabled
PCI IDE BusMaster
Set this option to [Enabled] to specify that the IDE controller on the PCI local
bus has bus mastering capability.
OnChip IDE Channel0
The integrated peripheral controller contains an IDE interface with support
for two IDE channels. Choose [Enabled] to activate each channel separately.