Instruction manual

MS-6427 Barebone

2-14

The motherboard provides the following jumpers for you to set the

computer’s function. This section will explain how to change your motherboard’s

function through the use of jumpers.

Clear CMOS Jumper: JBT1

There is a CMOS RAM onboard that has a power supply from external

battery to keep the system configuration data. With the CMOS RAM, the system

can automatically boot OS every time it is turned on. If you want to clear the

system configuration, use the JBAT1 (Clear CMOS Jumper ) to clear data. Fol-

low the instructions below to clear the data:

Jumper

JBAT1 Keep Data Clear Data

Important

You can clear CMOS by shorting 2-3 pin while the system is

off. Then return to 1-2 pin position. Avoid clearing the CMOS

while the system is on; it will damage the mainboard.