Instruction manual

2-3
Hardware Setup
Installing DDRII Modules
1. The DIMM memory module has only one notch on the center and will only fit in
the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in
until the golden finger on the memory module is deeply inserted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
The mainboard provides one slot for 240-pins non-ECC DDRII DIMM, which
supports the memory size up to 2GB. For more information on compatible
components, please visit http://www.msi.com.tw/program/products/slim_pc/slm/
pro_slm_cpu_support.php
Memory
Volt
Notch
DDRII
240-pins, 1.8V
56 x 2 = 112-pins
64 x 2 = 128-pins
Important
You can barely see the golden finger if the module is properly
inserted in the socket.