User`s manual

2-16

Hardware Setup

MS-7640

Chapter 2

Hardware Setup

MS-7640

Chapter 2

Front USB Connector: JUSB3

USB 3.0 port s backward-compatble wth USB 2.0 devces. Supports data transfer rate

up to 5 Gbt/s (SuperSpeed).

115V

USB3_TX3_C_DN

4.Ground

3.USB3_RX3_DP

2.USB3_RX3_DN

1.FUSB_VCC2

10.NC

9.SBD0+

8.SBD0-

7.Ground

6.USB3_TX3_C_DP

20.No Pin

19.FUSB_VCC1

18.USB3_RX4_DN

17.USB3_RX4_DP

16.Ground

15.USB3_TX4_C_DN

14.USB3_TX4_C_DP

13.Ground

12.SBD1-

11.SBD1+

* The MB layout n ths gure s for reference only.

USB 3.0 Bracket (optonal)

Important

Note that the pns of VCC and GND must be connected correctly to avod possble

damage.

If you want

to use a USB 3.0 devce, you must use the USB 3.0 cable to connect to

the USB 3.0 port.

IEEE1394 Connector: J1394_1

Ths connector allows you to connect the IEEE1394 devce va an optonal IEEE1394

bracket.

* The MB layout n ths gure s for reference only.

1394 Bracket (optonal)

•