Product guide

NeXtScale nx360 M4 24
The ServeRAID C100 is an integrated SATA controller with software RAID capabilities. It is a
cost-effective way to provide reliability, performance, and fault-tolerant disk subsystem management to
help safeguard your valuable data and enhance availability.
The ServeRAID C100 has the following specifications:
Supports RAID levels 0, 1, and 10

Onboard SATA controller with software RAID capabilities

Supports SATA HDDs and SATA SSDs

Offers two 6 Gbps SATA ports and two 3 Gbps SATA ports

Support for up to two virtual drives

Support for virtual drive sizes greater than 2 TB

Fixed stripe unit size of 64 KB

Support for MegaRAID Storage Manager management software

Note: The ServeRAID C100 is supported by Windows and Linux only. Depending on the operating system
version, drivers might need to be downloaded separately. There is no support for VMware, Hyper-V, or
Xen. The C100 supports SATA drives but does not support SAS drives.
For more information, see the list of Lenovo Press Product Guides in the RAID adapters category:
http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=raid