Specifications

4.3 Power On

After complete the installation , you can power on the PC as usual. Live videos should be displayed on

VGA screen if everything is OK.

4.4 Configuration

When you get videos displayed on VGA screen, you can configure the VP-24/28/216 PC DVR unit using

mouse or the IrDA controller(optional) comes with the VP-24/28/216 package. Please refer to User

manual “Chapter 3 operating VPON by mouse .

4.5 Connecting to the network

Connect an Ethernet-capable computer to the VPON LAN port using an RJ-45 crossed UTP cable or

connect both of the PC and VPON to a same hub :

1. The default IP address for the VPON is 192.168.10.10. Set your PC IP address to 192.168.10.xxx

(where xxx is a value between 0 ~ 254). Set the subnet mask to 255.255.255.0.

2. Reboot the PC.

3. Use IE Web browser version 6.0 SP2 up to access http://192.168.10.10. The login dialog box will

appear. If you have previously changed the administration login or password, enter the login name

and password you previously set. Otherwise, enter the default login name webmonitor and the

password oyo then click OK.

4. For first time accessing VPON , you will be prompted to install Live Video ActiveX. Download and

run the file to install ActiveX. Then restart IE browser, you will be able to see the videos. If you

choose not to install Active X, you can view videos from the VPON by clicking on the View Video

without Plugins link at the bottom of the page. At the prompt, enter the same administrator login

name and password as before. This uses a Java applet to display the video.

4.5.1 Remote access using dial-up

You can access the VPON remotely without the Internet by using a dialup modem. The VPON must be

working under Network mode.

1. Connect a dial-up modem and phone line to the VPON COM1 port.

2. Set COM1 to modem device in the VPON system menu.

3. On the remote PC, create a new dial-up setting (Windows).

4. Set the protocol to PPP.

5. Clear all advanced options and allowed network protocols except TCP/IP.

6. Set the IP address to 10.0.0.2.

7. Put a check mark in the server assigned server address box, uncheck “use IP header compression” and

“use default gateway” on the network boxes. Then click OK.

8. Enter the number of the phone line connected to the VPON, as well as the administrator user name and

password.

9. To access the VPON, use IE 6.0 SP2 up. Bring up IE on the PC and then access to 10.0.0.1.

Note: As this is a PPP connection, only one user can access the VPON at a time.